Spring and Channel Nuts

Spring Nuts

• Spring Nuts primary use is to attach StrutTech 
  fittings to the open face of channels

• Nut is molded with integral spring and seats 
  into channel notches

• Spring nut can be installed at any location from 
  the open side of the channel

• Highly Corrosion Resistant. See Chemical Resistant Guide

• Standard Material is Polyurethane

Spring Nut Order Information

Note: Standard quantity 25 each 

Spring Nut Bolts Order Information

Note: Standard quantity 25 each 
To order 316 Stainless bolts, substitute SS for PU in 
above part numbers

Channel Nuts

• Channel Nuts can be used for attaching
  StrutTech fittings to the open or back
  side of channel

• Nuts are also used to “double nut” 
  threaded rod to channels

• Channel Nuts will not rotate in the 
  channel

• Channel Nut can only be installed by 
  sliding the nut into position from the 
  end of the channel

• Material is Polyurethane (PU) 

Note: Standard quantity 25 each