mastheadStrutTech

Non-Slip Fiberglass Strut Channel System

Pipe Clamp Selection


Fixed Pipe Clamps 

  • Non-Slip in StrutTech Notched 
    Channel
  • Interchangeable with Industry 
    Standard Channel Framing
  • Non-Metallic Clamps with 
    Fasteners included
  • Stainless Steel or Non-Metallic 
    Fasteners
  • Clamps fit sizes ½” to 8”
  • Ease of Installation
  • No Special tools required
  • Highly Corrosion Resistant:  See 
    Chemical Compatibility Table, 
    Type PU

Fixed Pipe Clamps Order
Information 

  • Standard clamp material is 
    Polyurethane (PU)
  • Standard Fasteners are Stainless 
    316.
  • Polyurethane Fasteners available 
    (Substitute PU for SS in part number)

Fixed Pipe Clamp Ordering Information

StrutTech®
Part #

Pipe Size
(mm)		 Pipe O.D. (MM) Design Load
H		 Design Load
V
UFCPU50SS .5" (12.70) .84" (21.34) 160 60
UFCPU75SS .75" (19.05) 1.050" (26.67) 160 70
UFCPU100SS 1" (25.40) 1.315" (33.40) 195 90
UFCPU125SS 1.25" (31.75) 1.660" to (42.16) 215 115
UFCPU150SS 1.5" (38.10) 1.900" (48.26) 240 115
UFCPU200SS 2" (50.80) 2.375" to (60.32) 250 125
UFCPU250SS 2.5" (60.50) 2.875" (70.02) 265 125
UFCPU300SS 3" (76.02) 3.500" to (88.90) 285 145
UFCPU400SS 4" (101.60) 4.500" (114.30) 340 150
UFCPU500SS 5" (127.00) 5.563" to (141.30) 365 160
UFCPU600SS 6" (152.40) 6.625" (168.27) 405 170
UFCPU800SS 8" (203.20) 8.625" to (219.07) 420 185 
  • Design loads are based on minimum ultimate clamp failure safety factor 
    of 3:1
  • Vertical Load Ratings achieved using Non Slip 'Notched' StrutTech Channel only

  • Load Ratings based on PU Fasteners. Higher load ratings are typically
     achieved with SS Fasteners

Adjustable Pipe Clamps 

  • Non-Slip in StrutTech Notched 
    Channel
  • Interchangeable with Industry 
    Standard
     Channel Framing
  • Non-Metallic
  • Adjustable to U.S. and Metric Pipe 
    Diameters
  • Clamps fit Pipe Sizes ½” to 3 ½” 
    (15 mm to 88.9 mm)
  • Larger sizes available for non-load 
    bearing applications
  • Simple installation
  • No Special Tools Required
  • Highly Corrosion Resistant:  See 
    Chemical Compatibility Table, 
    Type PU
Adjustable Pipe Clamp Ordering Information

StrutTech®
Part #

Pipe Size Pipe O.D. Design Load
H		 Design Load
V		 Maximum
Torque
AC-50 .5" to .75" .75" TO 1.05" 135 70 15 in-lbs
AC-100 1" to 1.5" 1.05" to 1.90" 150 125 22 in-lbs
AC-200 1.5" to 2.5" 1.90" to 2.87" 150 125 22 in-lbs
AC-300 2.5" to 3.5" 2.87" to 4.00" 150 125 22 in-lbs 
  • Design loads are based on minimum ultimate clamp failure safety factor 
    of 3:1
  • Vertical Load Rating using StrutTech Notched Channel only
Note: Standard bag quantity of 25 each

Two Hole Pipe Straps

  • Non-Slip in StrutTech Notched 
    Channel
  • Non-Metallic
  • Stainless Steel or Non-Metallic 
    Fasteners
  • Straps fit sizes 2” to 6” 
    (50.8 to 152.4 mm)
  • Mount to StrutTech channel 
    or directly to other surfaces
  • Highly Corrosion Resistant:  
    See Chemical Compatibility Table
  • Design Loads are stated for 
    Horizontal and Vertical applications
  • Higher design loads possible when 
    mounted to solid surface. Consult 
    factory.

Two Hole Pipe Straps 

  • Standard strap material is 
    Polyurethane, Polyester is available 
    (substitute PF for PU in part number)
  • Fasteners are separate order items

Two Hole Pipe Strap Order Information
StrutTech®
Part #		 Pipe Size
(mm)		 Pipe O.D.
(mm)		 Design Load
H		 Design Load
V
PSPU200 2" (50.8) 2.375" (60.325) 175 125
PSPU300 3" (76.2) 3.500" (88.9) 200 125
PSPU400 4" (101.6) 4.500" (114.3) 200 125
PSPU600 6" (152.4) 6.625" (168.275) 225 125 
  • Design loads are based on minimum ultimate clamp failure safety 
    factor of 3:1
  • Vertical Load Rating using StrutTech Notched Channel only
Note: Standard bag quantity of 25 each for sizes 2” thru 4”
Note: “CF” = Call factory for design assistance

Adjustable Tubing Clamps

Designed for supporting process and 
instrumentation tubing under ¾” in 
diameter.Industry standard cable ties 
are held in place with modified StrutTech 
spring nuts.  	    
  • Non-Slip in StrutTech Notched 
    Channel
  • Non-Metallic
  • Clamps fit tubing under ¾”
  • Simple Installation
  • No Special Tools Required
  • Highly Corrosion Resistant:  
    See Chemical Compatibility Table, 
    Type PU

Adjustable Tubing Clamp Order Information
StrutTech®
Part #		 Description Channel Size Design Load H Design Load V
ABSN100PU Attachment Block for
Cable Tie		 1"    
ABSN200PU Attachment Block for
Cable Tie		 1 5/8"    
CT084PP50 Polypropylene Cable Tie 8.5" Long 1" & 1 5/8" 20 10 
Note: Standard bag quantity of 25 each
 
About Us | Site Map | Privacy Policy | Contact Us
 © 2008 StrutTech